English  |
| Quantity: | |
|---|---|
TFM-560
Sanway
Dual 8 inch Line Array
powered passive
Overview:
M212 is a dual 12 inch 2 way bi-amp PA stage monitor speaker.
It consists of two 12 inch lower frequency driver with neodymium magnet and one 1.4 exit horn-loaded compression driver. All the neodymium drivers have been used in the compact box to make its lightweight and convenient for transportation. It perfect for use wherever high SPL and exceptional intelligibility is required.
The 80° horizontal x 50° vertical horn pattern is designed to control of the sound field, so that the chance of the occurrence of feedback sound greatly reduced.
It offers impressive feedback rejection, developing high sound pressure levels without the need for excessive equalization.
The compact enclosure is made by 15mm birch plywood with weather-resistant semi matt black paint finish. Recessed connector panels are located at both ends of the cabinet, each fitted with two NL4 connectors, allowing for neat interconnection between units. Side mounted flush handles are provided for easy lifting and handling. A black powder coated perforated steel mesh grille with reticulated foam backing, and reinforced with a stabilizing bar, protects the drive units from damage.
Feature:
2x12 inch neodymium LF drivers, 1x1.4 exit neodymium HF driver.
15mm birch plywood with weather resistant finish
Low distortion waveguide provides 80° H x 50° V dispersion
800 Watts continuous, 3,200 Watts peak power
Specification
Frequency response (±3dB) | 80Hz - 15kH |
SPL | 129dB continuous |
Configuration | 2-way bi-amped stage monitor |
Nominal impedance | LF:4 Ω HF 8 Ω |
Power handling capacity (RMS/peak 10 ms) | 800/3200 W |
Nominal dispersion angle (h x v) | 80° x 50°@-6db points |
Components | 2x12" driver with neodymium magnet |
Connections | 2 x NL4 on each handle side |
Dimensions (H x W x D) | 397mm x 700mm x 561mm (15.6” x 27.6” x 22.1”) |
Weight | 30.5 kg (67.1 lbs) |
Overview:
M212 is a dual 12 inch 2 way bi-amp PA stage monitor speaker.
It consists of two 12 inch lower frequency driver with neodymium magnet and one 1.4 exit horn-loaded compression driver. All the neodymium drivers have been used in the compact box to make its lightweight and convenient for transportation. It perfect for use wherever high SPL and exceptional intelligibility is required.
The 80° horizontal x 50° vertical horn pattern is designed to control of the sound field, so that the chance of the occurrence of feedback sound greatly reduced.
It offers impressive feedback rejection, developing high sound pressure levels without the need for excessive equalization.
The compact enclosure is made by 15mm birch plywood with weather-resistant semi matt black paint finish. Recessed connector panels are located at both ends of the cabinet, each fitted with two NL4 connectors, allowing for neat interconnection between units. Side mounted flush handles are provided for easy lifting and handling. A black powder coated perforated steel mesh grille with reticulated foam backing, and reinforced with a stabilizing bar, protects the drive units from damage.
Feature:
2x12 inch neodymium LF drivers, 1x1.4 exit neodymium HF driver.
15mm birch plywood with weather resistant finish
Low distortion waveguide provides 80° H x 50° V dispersion
800 Watts continuous, 3,200 Watts peak power
Specification
Frequency response (±3dB) | 80Hz - 15kH |
SPL | 129dB continuous |
Configuration | 2-way bi-amped stage monitor |
Nominal impedance | LF:4 Ω HF 8 Ω |
Power handling capacity (RMS/peak 10 ms) | 800/3200 W |
Nominal dispersion angle (h x v) | 80° x 50°@-6db points |
Components | 2x12" driver with neodymium magnet |
Connections | 2 x NL4 on each handle side |
Dimensions (H x W x D) | 397mm x 700mm x 561mm (15.6” x 27.6” x 22.1”) |
Weight | 30.5 kg (67.1 lbs) |
