English  |
| Quantity: | |
|---|---|
MG166FX/CX/CX-USD
Sanway
Touch Control
16
4
DJ Mixer
| MG166FX/CX/CX-USD audio Mixer - specification | |
| Total Harmonic Distortion | Less than 0.1 % (THD+N) 20 Hz - 20 kHz @ +14 dBu (ST OUT) |
| Frequency Response | 0, +1, -3 dB 20 Hz - 20 kHz @ +4 dBu (ST OUT) |
| Hum & Noise | -128 dBu Equivalent Input Noise/ -98 dBu Residual Output Noise 20 Hz - 20 kHz, Rs = 150 Ω , Input Gain = Maximum |
| Input Connectors | MIC: 10, LINE: 8 mono + 4 stereo, CH INSERT: 8, AUX RTN: 1 stereo, 2TR IN: 1 |
| Output Connectors | ST: 2, AUX SEND: 2, EFFECT SEND: 1, CH INSERT: 8, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 4 Phone: 1 |
| Crosstalk | -70 dB @ 1 kHz |
| Phantom Power | + 48 V |
| Input HPF | CH 1-8, CH 9/10-11/12, 80Hz, 12dB/oct |
| CH EQ (MONO) ± 15 dB (Max. )High | 10 k Hz: shelving |
| CH EQ (MONO) ± 15 dB (Max. )Mid | 2.5 k Hz: peaking |
| CH EQ (MONO) ± 15 dB (Max. )Low | 100 Hz: shelving |
| CH EQ (STEREO) ± 15 dB (Max. )High | 10 k Hz: shelving |
| CH EQ (STEREO) ± 15 dB (Max. )Mid | _ |
| CH EQ (STEREO) ± 15 dB (Max. )Low | 100 Hz: shelving |
| Compressor (COMP) | Control x 1 (Gain/Threshold/Ratio), CH 1-6 |
| Internal Digital Effect | 16 PROGRAM, PARAMETER control Foot Switch (Digital Effect, on/off) |
| LED Level Meter / Pre Monitor Level | 2 x 12 points LED meter (PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB) PEAK lights if the signal comes within 3 dB of the clipping level. |
| Peak Indicator | Red LED turns on when post EQ (ST CH: or post Mic HA) signal reaches -3dB below clipping (17dBu). |
| Power Supply Adapter | PA-30: AC 35VCT, 1.4A, Cable Length = 3.6m |
| Power Consumption | 35 W |
| Dimensions (W x H x D) | 478 mm x 105 mm x 496 mm |
| MG166FX/CX/CX-USD audio Mixer - specification | |
| Total Harmonic Distortion | Less than 0.1 % (THD+N) 20 Hz - 20 kHz @ +14 dBu (ST OUT) |
| Frequency Response | 0, +1, -3 dB 20 Hz - 20 kHz @ +4 dBu (ST OUT) |
| Hum & Noise | -128 dBu Equivalent Input Noise/ -98 dBu Residual Output Noise 20 Hz - 20 kHz, Rs = 150 Ω , Input Gain = Maximum |
| Input Connectors | MIC: 10, LINE: 8 mono + 4 stereo, CH INSERT: 8, AUX RTN: 1 stereo, 2TR IN: 1 |
| Output Connectors | ST: 2, AUX SEND: 2, EFFECT SEND: 1, CH INSERT: 8, REC: 1 stereo, MONITOR: 1 stereo, GROUP: 4 Phone: 1 |
| Crosstalk | -70 dB @ 1 kHz |
| Phantom Power | + 48 V |
| Input HPF | CH 1-8, CH 9/10-11/12, 80Hz, 12dB/oct |
| CH EQ (MONO) ± 15 dB (Max. )High | 10 k Hz: shelving |
| CH EQ (MONO) ± 15 dB (Max. )Mid | 2.5 k Hz: peaking |
| CH EQ (MONO) ± 15 dB (Max. )Low | 100 Hz: shelving |
| CH EQ (STEREO) ± 15 dB (Max. )High | 10 k Hz: shelving |
| CH EQ (STEREO) ± 15 dB (Max. )Mid | _ |
| CH EQ (STEREO) ± 15 dB (Max. )Low | 100 Hz: shelving |
| Compressor (COMP) | Control x 1 (Gain/Threshold/Ratio), CH 1-6 |
| Internal Digital Effect | 16 PROGRAM, PARAMETER control Foot Switch (Digital Effect, on/off) |
| LED Level Meter / Pre Monitor Level | 2 x 12 points LED meter (PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB) PEAK lights if the signal comes within 3 dB of the clipping level. |
| Peak Indicator | Red LED turns on when post EQ (ST CH: or post Mic HA) signal reaches -3dB below clipping (17dBu). |
| Power Supply Adapter | PA-30: AC 35VCT, 1.4A, Cable Length = 3.6m |
| Power Consumption | 35 W |
| Dimensions (W x H x D) | 478 mm x 105 mm x 496 mm |
